S.S. Insulation and Equipments is a leading Cyclone Separator Manufacturers in Pune, Suppliers, Dealers, Wholesalers and Works in Pune. Our company established in 1984 and From a Mild Steel Cyclone Separator for general industrial dust separation to a Multi Cyclone Separator for applications requiring multiple separation chambers, our solutions are developed to support practical particulate separation and air-management requirements. We have been providing dependable separation and air-handling solutions for industrial applications involving dust, particulate matter and process air.
Depending on the process, customers can select from single cyclone, multi-cyclone and duct-connected configurations with suitable material and fabrication options. Our cyclone separator solutions are designed according to application requirements, airflow capacity, particle characteristics, operating conditions, system layout and installation requirements.
As experienced Industrial Cyclone Separator Suppliers in Pune, we provide cyclone-based separation solutions that can be integrated with dust collection, exhaust, pneumatic conveying and industrial ventilation systems. Our Cyclone Separator System can be configured according to the required airflow, particle loading, equipment arrangement and downstream filtration requirements.
Cyclone Separator is a mechanical separation device used to remove solid particles, dust and other particulate matter from an air or gas stream. It uses centrifugal force to separate heavier particles from the moving airflow without relying primarily on filter media.
The relatively cleaner air then moves toward the outlet. A properly selected Industrial Separator can support dust separation, reduce particulate loading on downstream equipment and improve the overall performance of an industrial air-handling or dust-collection arrangement.
As established Cyclone Separator Manufacturers in Pune, we provide different configurations based on airflow, dust characteristics, process requirements and installation conditions.
550CMH Electric Cyclone Separator- A 550CMH Electric Cyclone Separator is a compact cyclone-based separation solution designed for systems requiring an airflow capacity of approximately 550 cubic metres per hour, subject to the specific system design. It can be considered for suitable small-scale industrial dust and air-separation applications where the airflow and particle characteristics match the equipment requirements.
As Cyclone Separator Suppliers in Pune, we provide equipment according to application requirements, process conditions, project drawings and system design.
| Technical Specification | Details |
|---|---|
| Product Type | Cyclone Separator |
| Separator Types | Mild Steel Cyclone, Industrial Cyclone, Multi Cyclone, Duct Separator |
| Construction Material | Mild Steel, Stainless Steel and other suitable materials |
| Cyclone Configuration | Single Cyclone or Multi Cyclone |
| Airflow Capacity | 550 CMH to 50,000 CMH, as per system requirement |
| 550CMH Model | 550 CMH Electric Cyclone Separator |
| Inlet Configuration | 100 mm to 1500 mm inlet diameter/width, as per design |
| Outlet Configuration | 100 mm to 1200 mm outlet diameter/width, as per system design |
| Duct Connection | 100 mm to 1500 mm, according to duct size and layout |
| Collection Arrangement | 50 L to 5000 L hopper, dust bin or connected collection system |
| Cyclone Shape | Cylindrical and conical body configuration |
| Body Diameter | 300 mm to 3000 mm, as per airflow requirement |
| Body Height | 1000 mm to 6000 mm, depending on design |
| Cone Height | 500 mm to 3000 mm, as per cyclone configuration |
| Body Thickness | 2 mm to 10 mm, selected according to material and operating conditions |
| Operating Temperature | Up to 250°C, depending on material and application |
| Pressure Drop | 50 Pa to 1500 Pa, depending on design and airflow |
| Particle Size | Suitable for separation of approximately 5 µm and larger particles, depending on design |
| Surface Finish | Primer coating, industrial paint or application-specific finish |
| Installation | Floor-mounted, structure-mounted or application-specific |
| Airflow Direction | Tangential inlet with axial or application-specific outlet |
| Fabrication | 1 mm to 10 mm material thickness, as per approved drawings and project requirements |
Being experienced Cyclone Separator Dealers in Pune, our solutions are developed around practical separation, airflow management and industrial operating requirements.
As Cyclone Separator Wholesalers in Pune, our cyclone separation solutions can be considered for different industries where dust-laden air or particulate material needs to be separated.
S.S. Insulation and Equipments is a well-known Cyclone Separator Manufacturers in Pune, Suppliers, Dealers, Wholesalers and Works in Pune, we providing cyclone-based solutions for industrial dust separation, exhaust, ventilation and air-handling applications. We focus on application-specific design, suitable material selection, accurate fabrication, practical airflow arrangements and compatibility with connected industrial systems. Contact us today to discuss your Cyclone Separator requirements.
A Cyclone Separator is primarily used to separate suitable dust and particulate matter from an air or gas stream using centrifugal force. It is commonly integrated into industrial dust collection, exhaust and air-handling systems.
An Industrial Cyclone Separator creates a rotating airflow inside its body. Centrifugal force moves heavier particles toward the cyclone wall, after which the particles travel downward into the collection section while the separated air exits through the outlet.
Selection should consider airflow capacity, particle size and density, dust concentration, temperature, material compatibility, pressure conditions, available installation space, collection arrangement and downstream equipment requirements.
Cyclone separators can be manufactured from Mild Steel, stainless steel and other suitable materials depending on temperature, corrosion exposure, particle characteristics, hygiene requirements and operating conditions.
A Cyclone Separator System is an integrated arrangement consisting of the cyclone separator and associated components such as inlet and outlet ducting, dust collection equipment, fans or downstream filtration equipment, depending on the application.
550CMH Electric Cyclone Separator refers to a cyclone-based system designed around an airflow requirement of approximately 550 cubic metres per hour. Its suitability depends on the actual airflow, particle characteristics and overall system design.
Yes. A cyclone separator can be integrated with a dust collector, filter, exhaust fan or other air-treatment equipment depending on the overall system design. The cyclone may be used as a preliminary separation stage before finer filtration.
